Product List

...
Acuvim II Series

Quality engineered energy submeters provides a simple robust solution for power monitoring, power quality analysis, kWh metering, system integration, controlling power distribution systems & other speciality applications.

Read more ...
...
Acuvim L Series

This three phase energy meter is ideal for applications that require standard parameters for monitoring and controlling power distribution systems, medium to low voltage systems, industrial automation and commercial facilities. Acuvim L power meters comes with a choice of a built-in communication Modbus RTU, pulse output or none for panel meters.

Read more ...
...
AC Ammeter & Voltmeter

The moving iron panel meters, DE 48/72/96/144 housed in moulded polycarbonate cases are suitable for the measurement of AC currents for frequency range of 15...400Hz and voltages in the frequency range of 15...100Hz. Moving iron meters indicate rms-values practically independent of waveform even of high harmonics. Error of indication may occur for extreme waveforms (e.g. phase gating controls) & for frequencies above 100KHz. These meters offer several advantages in switchboards and Generating Set Panels. Number of meters can be mounted in a Panel cut out Mosaic mounting). For CT operated ammeters, dials can be fitted based on CT ratio. Glass and bezel can be easily replaced.

Read more ...
...
DC Ammeter & Voltmeter

The moving coil panel meters, DS 48/72/96/144 housed in moulded polycarbonate cases are suitable for the measurement of DC currents and voltages. These instruments offer several advantages in switchboards and Generating Set Panels. Number of meters can be mounted in a Panel Cut out (Mosaic mounting). Front glass, Bezel & Dial can be easily replaced.

Read more ...
...
Annunciator

We deal in high quality Alarm Annunciators, which are proffered with several advanced features. With the innovative automation at all phases in the process control system, these annunciators have a vital character in instant fault recognition by rendering audible alarms and instant visual to protect several valuable equipment. These suffice as the highly cost-effective solutions and are basically known as the highly functional audio visual warning system. These can highlight the fault as well as mishap that are going on. Alarm Annunciators are extremely necessary for safety concern. These panels are the functional systems, which exhibit the status of the alarm signal employing sound and light features.

Read more ...
...
LZQJ-XC

The LZQJ-XC series counters are designed for universal applications in accordance with VDEW specification 2.1. Thanks to the use of a proven measuring method, the meters are characterized by a high level of reliability. The powerful processor system guarantees a solid basis for future expansions.

Read more ...
...
Stroboscopes

Nova-Pro® is a series of powerful portable visual inspection and speed measurement tools. Monarch's combined all the features of our handheld LED stroboscopes with a full-function laser tachometer to create a compact, ergonomic, and extremely powerful two-in-one predictive maintenance tool. The Nova-Strobe LED family of rugged industrial stroboscopes provide an extremely bright, uniform light output for performing stop-motion diagnostic inspection and RPM measurements. Plus, Monarch offers the Palm Strobe X, a handheld-phaser design offering single-handed operation for fast fractional RPM tuning, and the VBX Vibration Strobe, uniquely designed to provide precise, instantaneous synchronization to a number of data collectors and FFT analyzers triggered by an accelerometer.

Read more ...
...
Rish Relay V/Hz

True RMS Digital Protection Relay

Read more ...
...
Shunt Resistor

Shunts provide an accurate DC millivolt signal to drive ammeter indicators,overload protection and control devices, especially for higher amperage. They supply a voltage drop proportional to the dc current which is measured and indicated by a moving coil meter with the dial calibrated in amps.

Read more ...
...
Double Voltmeter DE 2 in 1

The moving iron panel meters, 2-in-1 housed in moulded polycarbonate cases are suitable for the measurement of AC currents for frequency range of 15...400Hz and voltages in the frequency range of 15...100Hz. Moving iron meters indicate rms-values practically independent of waveform even of high harmonics. Error of indication may occur for extreme waveforms (e.g. phase gating controls) & for frequencies above 100Hz. These meters offer several advantages in switchboards and Generating Set Panels. Number of meters can be mounted in a single cut out (Mosaic mounting). Front window, Glass and bezel can be easily replaced

Read more ...
...
Double Frequency Meter ZQ 2 in 1

The pointer type frequency meters ,2 in 1 144 housed in moulded polycarbonate cases are suitable for the measurement of frequencies in the range of 45 to 450 Hz. ZQ 96/ For maximum accuracy, the essential measuring range is obtained by suppressing the unwanted frequency span. These instruments offer several advantages in switchboards and Generating Set Panels.Number of meters can be mounted in a single Cut out(Mosaic mounting). Front glass, Bezel & Dial can be easily replaced.

Read more ...
...
AC Current & Voltage Transducer

The RISH CON - V / RISH CON - I is used to measure and convert AC Voltage or Current input into a load independent DC current or voltage output signal.Output signal generated is proportional to the root mean square value of the input Current or Voltage.

Read more ...
...
Frequency Transducer Rish Con Hz

The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage

Read more ...
...
Power Transducer Rish Con P

The RISH CON - P transducer is used to measure and convert active, reactive, apparent power, Phase angle & Power Factor of a Single-phase or Three-phase AC system with balanced or unbalanced load into a proportional load independent DC current or voltage output signal

Read more ...
...
Multi Transducer Rish Con M

The RISH CON - M transducer is used to measure and convert parameter of Three-phase 3W/4W AC power network with balanced or unbalanced system. It ensures that the measurement and conversion of measured values into standard analog current signals.Relay outputs signal the overflow of the selected quantitis,and the pulse output can be used for the consumption monitoring of the 3phase active energy.

Read more ...
...
Synchronoscope SQ

The Electronic Synchroscope is designed to provide an illuminated indication of actual phase difference between the BUS Voltage(reference voltage) & the GENERATOR Voltage(incoming voltage) It denotes the actual frequency difference corresponding to the inverse of time taken for one rotation of the illuminated vector spot. When two alternators are paralleled,it is necessary that, 1)Frequency must be equal. 2)Phase must be same. Sychroscope is,hence used to indicate the Phase & Frequency difference between two AC alternators,which are to be paralleled

Read more ...
...
Analog Power Meter LM

The Watt meters, LM96 are offered for the AC systems: single phase, 3 phase balanced load 3 or 4 wire, 3 phase unbalanced load 3 or 4 wire. These instruments are suitable to indicate forward (export / out going) and reverse (import / in coming) power flow. They can be used both on sinusoidal and non - sinusoidal current. These meters offer several advantages in Switchboard and Generating Set panels. Number of meters can be mounted in a Panel Cut out (Mosaic Mounting).The Bezel, Front window glass and Dial can be easily replaced

Read more ...
...
Analog Power Factor Meter LF

The moving coil indicators and a phase angle adjuster are used to monitor changing power factor conditions on ir-reversible balanced load systems. The power factor is indirectly determined by measuring the phase angle φ between current and voltage (both sinusoidal). However the indicators are calibrated in values of cosine of the angle φ. These meters offer several advantages in Switchboard & Generating Set panels.Number of meters can be mounted in Panel Cut out (Mosaic Mounting).The Bezel, glass and dial can be easily replaced.

Read more ...
...
Maximum Demand Meter

The maximum demand ammeters BM 48 and BM/EB 72/96 housed inmoulded polycarbonate cases,monitor the most economic use of transformer stations & LT distribution feeders by indicating the thermal/time characteristics of the load. The high torque of the thermal movement drive a red slave pointer linked to the instrument pointer. The slave pointer will remain at the maximum value reached for a subsequent reading until being manually reset by a sealable reset knob to the position of the instrument pointer. Where the instantaneous and maximum demand currents are required, the EB 72/96 instrument,which combines a thermal bimetallic and a moving - iron movement in the same case mounted diagonally opposite to each other. These instruments are suitable for frequency range of 15-400Hz. These meters offer several advantages in Switchboard and Generating Set panels. Number of meters can be mounted in a Panel Cut out (Mosaic Mounting). The bezel, glass and dial can be easily replaced.

Read more ...
...
Current & Voltage Transducer Rish Con CA/CV (Fix Type)

The transducer RISH CON - CA/CV (Fig.1) converts a sinusoidal or distorted AC Current or AC Voltage into a load independent DC Current or a load independent DC Voltage proportional to the measured value. Output signal generated is proportional to the root mean square value of the input Current or Voltage

Read more ...
...
Thermostat JWT6011

Commonly used in monitoring filter fans & heat exchangers

Read more ...
...
Heater - JRQ

Heater for electrical cabinet wet applications in need of protection or the temperature is not below a specified minimun number of occasions. Alumunium profile body design more stable form of the chimney effect of the release of heat. pressure terminal connectors save time and be more simpler to install

Read more ...
...
Hygrostat JWT6013

Electromechanical humidity controller for the relative humidity exceed 65%. by controlling the temperature inside the heater to improve thus avoiding the occurrence of moisture and corrosion

Read more ...
...
Earth Leakage Relay

The purpose of Earth Leakage protection is to measure the Earth leakage current of an electrical installation, or part of an installation, and interrupt the power supply if the Earth-Leakage current becomes dangerous to property.

Read more ...
...
DC Power Meter ACUDC 240 Series

The AcuDC 240 Series is a line of DC power meters that measures the voltage, current, power and energy parameters. They are used for monitoring and controlling energy flow in DC systems. Readings are displayed on the brilliant 3 line black backlight LCD display. All AcuDC models offer integration with external systems using MODBUS RTU protocol and an on-board RS485 serial communication port.

Read more ...
...
Aculink 810

AcuLink 810 is a data acquisition server and gateway designed to collect aggregated energy data from up to 32 Modbus meters and field sensors in a facility such as water, gas and electricity. This information is locally stored until it is ready to be distributed to remote servers or controllers via an IP-based network. AcuLink 810 provides an easy solution to manage, collect and store data from all connected metering points from a single web interface.

Read more ...
...
Rish LM1360

RISH LM1350 / LM1360 measures important electrical parameters in 3 phase 4 wire,3 phase 3 wire and1 phase 2 wire Network. It displays many parameters at a glance. It measures electrical parameters like Active / Reactive / Apparent energy , power and all basic parameter. The instrument has two optional outputs. It can be configured as pulse output for energy measurement , limit output , timer function and RTC relay.

Read more ...
...
Rish Delta Energy

RISH Delta Energy measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Network & replaces the multiple analog panel meters. It measures electrical parameters like AC Voltage,AC Current, Frequency, Active, Reactive, Apparent Power, Import & Export Energy & many more

Read more ...
...
Rish Xmer Square CT

Rish X’mer CTs are square type and encapsulated with UL94V-0 approved polycarbonate. Metering CTs feature with wire sealable terminal covers & wide range of primary current ratings, Bus bar sizes, case widths. Wall, cable, bus bar & DIN rail mounting options available.

Read more ...
...
Rishducer Mxx

Mxx series simultaneously measure several variables of electric power system converting them into 2,3 or 4 analog output, 2 or 4 digital output for signaling limits, power metering, limit output AND/OR, Output Simulation, acquisition of meter data, mark setting with universal supply

Read more ...
...
Rishducer E13

The Transducer RISH Ducer E13 is used to convert a 3 sine wave AC Voltage or AC Current (depending on types) into a (load independent DC current or load independent DC Voltage) 3 output signal. That can serve several receiving instruments such as indicators, recorders, alarm units etc

Read more ...
...
A2000

The A2000 multifunctional power meter measures all values for three-phase systems.

Read more ...
...
Sineax I538

The transformer SINEAX I 538 (Fig. 1) converts a sinusoidal AC current into a load independent DC current or a load independet DC voltage proportional to the measured value. The transducer fulfils all the important requirements and regulations concerning electromagnetic compatibility EMC and Safety (IEC 1010 resp. EN 61 010). It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001.

Read more ...
...
Sineax I542

The transducer SINEAX I 542 (Fig. 1) converts a sinusoidal AC current signal into an output signal that can serves several receiving instruments such as indicators, recorders, alarm units etc. The transducer fulfils all the important requirements and regulations concerning electromagnetic compatibility EMC and Safety (IEC 1010 resp. EN 61 010). It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001.

Read more ...
...
Sineax U539

The transducer SINEAX U 539 (Fig. 1) converts a sinusoidal AC voltage into a load independent DC current or a load independent DC voltage proportional to the measured value. The transducer fulfi ls all the important requirements and regulations concerning electromagnetic compatibility EMC and Safety (IEC 1010 resp. EN 61 010). It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001.

Read more ...
...
Sineax DM5S / DM5F

SINEAX DM5S and SINEAX DM5F are freeprogrammable universal measurement devices for heavy-current systems: Classical high-accuracy transducers, suited for monitoring tasks and retrofit applications in energy distribution and industry. The devices can be adapted fast and easily to the measurement task by means of the CB-Manager software – even if there is no power supply available. Depending on the device version measured quantities can be mapped proportionally to analog DC current outputs or to Modbus.

Read more ...
...
Sineax F534

The transducer SINEAX F534 (Fig. 1) is intended for frequency measurement. The instrument change the measured value into a proportional load independent DC current or DC voltage. The transducer fulfi ls all the important requirements and regulations concerning electromagnetic compatibility EMC and Safety (IEC 1010 resp. EN 61 010). It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001.

Read more ...
...
Sineax TV819

The purpose of the active isolating amplifi er SINEAX TV 819 (Fig. 1) is to electrically insulate input and output signals, respectively to amplify and/or change the signal level or type (current or voltage) of the input signals. The compact SINEAX TV 819 provides a large selection of input and output ranges that can be confi gured by the user with soldered jumpers and potentiometers. The amplifi er fulfi ls all the important requirements and regulations concerning electromagnetic compatibility EMC and Safety (IEC 1010 resp. EN 61 010). It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001.

Read more ...
...
Sineax V604s

Programmable Multifunctional Transmitter for currents, voltages, temperature sensors, remote transducers or potentiometers.

Read more ...
...
Rish Eine AC Digital Meter

The digital panel meter PROGRAMMABLE RISHEine have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range. It can be used in industrial automation and for laboratory uses. PROGRAMMABLE RISHEine measures important electrical parameters in 3 phase 4 Wire, 3 phase 3 Wire and single phase Network & replaces the multiple analog panel meters.

Read more ...
...
Rish Eine+ DC Digital Meter

RISH Eine has been designed for industrial applications, which frequently require precise and on-site adjustment of the display range.

Read more ...
...
Split Core CT

Rish Split core CTs are square type and encapsulated with UL94V-0 approved polycarbonate having an openable jaw which enables an operation free installation/removal. Wide range of system current ratings, Busbar sizes, case widths & having wall, cable & bus bar mountings

Read more ...
...
Protection Class CT

Rish Protection class CTs are square & round type encapsulated with UL94V-0 approved polycarbonate.These CTs used for protection purpose (acc class 5P10, 10P10 etc)& features wide range of primary current ratings, Busbar sizes,case widths,having wall, cable, bus bar & DIN rail mountings.

Read more ...
...
AcuRev 2000 Series

Multi-circuit power metering system that monitors kilowatt-hour (kWh), power, energy, demand, peak demand and time-of-use (TOU) in high-density applications. Best used for tenant submetering, commercial facilities and branch circuit monitoring where multiple units require monitoring.

Read more ...
...
AcuRev 2100 Series

Accuenergy’s AcuRev 2100 is the next generation multi-circuit submeter designed to measure up to 18 single-phase or 6 three-phase circuits using SnapOn CT technology for quick and easy installations in high-density, multi-point applications. Reliably monitor real-time energy consumption and perform power quality analysis in commercial, industrial, and residential multi-tenant energy management systems.

Read more ...
...
Rish Relay I

RISH Relay I is used to protect against Over Current, Under Current, Current Loss, Current Un balance

Read more ...
...
4750N.05 Series

Designed for your conference or board room, situation room or operations centre the 4750N range of digital time zone clocks provides a precise multi-time readout of local time in all of your trading regions, operational areas or centres of interest together with a multi-language calendar.

Read more ...
...
Rish Clamp Solar With 1500 AC/DC Current And 1500v DC Voltage

Rish Clamp Solar With 1500 AC/DC Current And 1500v DC Voltage

Read more ...
...
RISH Clamp Power 1000A/400A AC/DC

RISH Clamp Power 1000A/400A AC/DC

Read more ...
...
6016 Rishabh True RMS Digital Multimeter

6016 Rishabh True RMS Digital Multimeter

Read more ...
WORKING HOURS

Monday - Friday : 08.15 - 17.15

Saturday - Sunday : Closed

MAPS

CONTACT US

Komplek Rukan Taman Meruya
Blok N-15-16, Meruya Utara, Kembangan, Jakarta Barat,
Daerah Khusus Ibukota Jakarta 11620

bisnis@amptron-indo.com

(+62-21) 585 5055
(+62-21) 586 0826
(+62-21) 586 0828